2
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 OUTLINE OF THE MACHINE
2 - 59
[D-2] When PFP/LCF is installed
(1) Turn the power OFF and unplug the power
cable.
(2) Take off the connector cover and disconnect
the connector.
Fig. 2-93
(3) Remove 2 screws and take off the cover on
the rear side.
Fig. 2-94
(4) Remove 2 screws and take off the cover on
the front side.
Fig. 2-95
Connector
Connector cover
Cover
Cover
04/09
To Next Page
Loading...
