e-STUDIO166/206 © February 2007 TOSHIBA TEC CORPORATION All rights reserved
PAPER FEEDING SYSTEM
10 - 2
10.2 Configuration
Paper feeding system
Drawer Pickup roller Periodic replacement part
Pickup solenoid (SOL1)
Drawer pickup clutch
Paper empty sensor (S7)
Bypass unit Bypass pickup roller Periodic replacement part
Bypass feed roller Periodic replacement part
Bypass separation pad Periodic replacement part
Bypass sensor (S8)
Bypass pickup solenoid (SOL2)
Bypass pickup clutch
Bypass feed clutch
Registration roller
Registration roller clutch (CLT1)
Registration sensor (S4)
Drawer detection switch (SW5)
To Next Page
Loading...
