e-STUDIO166/206 © February 2007 TOSHIBA TEC CORPORATION All rights reserved
CONTROL PANEL
5 - 6
5.5 Disassembly and Replacement
[A] Control panel unit
(1) Remove 3 screws.
Fig. 5-4
(2) Take off the control panel unit while lifting it
up.
(3) Disconnect 1 connector.
Note:
When installing the control panel unit, be
sure not to have the harness being caught by
the front right cover and the unit.
Fig. 5-5
Connector
Control panel unit
To Next Page
Loading...
