e-STUDIO166/206 © February 2007 TOSHIBA TEC CORPORATION All rights reserved
GENERAL OPERATION
4 - 6
4.3.2 Description of abnormality
(A) Add paper
(B) Pick-up failure in bypass
• Drawer empty sensor detects the presence or absence of paper.
[When drawer is not installed]
No drawer detected
#
LED “Add paper” ON
#
[START] button disabled
[When drawer is installed]
#
Drawer detected
#
Paper empty sensor OFF
#
LED “Add paper” ON
#
[START] button disabled
• During bypass feeding
Bypass pickup solenoid ON
#
Registration sensor is not turned ON in a fixed period of time
#
Clear paper symbol is displayed: E12
#
Copying operation is disabled
#
Solution: The bypass paper sensor is turned OFF by removing the paper from the bypass tray.
To Next Page
Loading...
