Toshiba e-STUDIO 206 - Relation between Equipment State and Operation

e-STUDIO166/206 © February 2007 TOSHIBA TEC CORPORATION All rights reserved
CONTROL PANEL
5 - 4
5.3 Relation between Equipment State and Operation
[START] [CLEAR/
STOP]
[FUNCTION
CLEAR]
[INTERRUPT] [ENERGY
SAVER]
Other but-
tons/ keys
Waiting Starts copying Clears copy
quantity
Clears each
setting
Enters into
interrupting
copy
Enters into
energy sav-
ing mode
Operation
acceptable
Warming up Reserves
auto start job
Clears copy
quantity
Clears each
setting
--- --- Operation
acceptable
Copying --- Pauses copy
job
--- Enters into
interrupting
copy
--- ---
Pausing copy
job
Resumes
copy job
Cancels copy
job
Clears each
setting
Enters into
interrupting
copy
--- ---
Downloading
firmware
--- --- --- --- --- ---
In energy sav-
ing (low
power) mode
--- --- --- --- Enters into
waiting state
---
In sleep mode Enters into
waiting state
Enters into
waiting state
Enters into
waiting state
Enters into
waiting state
--- Enters into
waiting state
Interrupting
copy job
Starts inter-
rupting copy
Clears copy
quantity
Cancels inter-
rupting copy
Cancels inter-
rupting copy
--- Operation
acceptable
Cover open --- Clears copy
quantity
Clears each
setting
--- --- Operation
acceptable
Toner empty --- --- --- --- --- Operation
acceptable
Paper jam --- --- --- --- --- ---
Service call --- --- --- --- --- ---