e-STUDIO166/206 © February 2007 TOSHIBA TEC CORPORATION All rights reserved
POWER SUPPLY UNIT
14 - 4
14.4 Fuse
When the power supply secondary fuse is blown out, confirm that there is no abnormality with each part
using the following table.
Voltage Board/Unit Part Fuse type
+24V MAIN board Scan motor M1 F203: 4A
Polygonal motor M4
Switching regulator cooling fan M6
Registration clutch CLT1
Pickup solenoid SOL1
Bypass pickup solenoid SOL2
Contact image sensor unit CIS
PFU
+24VDF ADF
+24VCOV-OFF MAIN board Toner motor M2 F201: 4A
Main motor M3
Exhaust fan M5
Auto-toner sensor S6
Discharge LED ERS
Coin controller
To Next Page
Loading...
