e-STUDIO166/206 © February 2007 TOSHIBA TEC CORPORATION All rights reserved
PAPER FEEDING SYSTEM
10 - 12
[D] Bypass roller unit
(4) Take off the bypass separation pad while
pinching the mounting bracket.
Fig. 10-12
Note:
When the separation pad is replaced, apply
one grain of rice-sized white grease to the
supporting point.
Fig. 10-13
(1) Take off the bypass unit.
" P.10-10 "[A] Bypass unit"
(2) Remove 2 screws, and take off the cover.
Fig. 10-14
Bypass separation pad
Bypass separation pad
White grease
Cover
To Next Page
Loading...
