e-STUDIO166/206 © February 2007 TOSHIBA TEC CORPORATION All rights reserved
DEVELOPMENT SYSTEM
12 - 14
[E] Drum thermistor (THMS4)
[F] Guide roller / Developer sleeve
(1) Remove the developer material.
" P.12-12 "[B] Developer material"
(2) Disconnect 1 connector, remove 1 screw and
take off the drum thermistor.
Fig. 12-13
(1) Remove the developer material.
" P.12-12 "[B] Developer material"
(2) Remove 2 screws and take off the recovered
toner supply unit.
Fig. 12-14
(3) Remove 1 screw. Disconnect 1 connector
while taking off the recovered toner drive
unit. Remove 1 gear.
Fig. 12-15
Drum thermistor
Connector
Recovered toner
supply unit
Gear
Recovered toner drive unit
Connector
To Next Page
Loading...
