Forwarding Received Data As Digital Data (Auto Delivery)
-163-
9
Settings for Auto Delivery and Transmission Data
Save Functions (for e-STUDIO403S Only)
10 Select the check box you require in
[Search field].
11 Select [OFF] for [Print].
If you select [ON], the received data is printed
out.
12 Configure an e-mail destination.
a) [Click [
Edit
] in the [
E-mail address
] field.
b) Enter a recipient email address and click
[Add].
c) Check that the entered address is listed in
the [Address List] field and then click
[OK].
13 Configure a network folder destination.
a) Click [Edit] in the [Folder].
b) Select a destination from the [Profile
List] and then click [OK].
To Next Page
Loading...
