Using Drivers and Software
-42-
Starting a Scan Job
Memo
z The explanations in this section use PaperPort as an
example, and may differ from the description depending
on your application.
1 Place your document with text face up in
the ADF or face down on the document
glass.
2 Press the <SCAN> key.
3 Press the to select [Remote PC] and
then press .
4 Start PaperPort on your computer.
5 Click [Select] and then click
[WIA: eS332/403S].
6 Click [Scan].
7 Select a paper feeding method.
8 Select a document type.
9 Specify the area to be scanned.
10 Click [Scan].
11 Click [Cancel] when scanning is finished.
12 When there is no continued page or the
back side is not scanned, click [Finish].
The scanned image is displayed in PaperPort.
Using Windows FAX and Scan
"Windows FAX and Scan" is a function used in
Windows Vista/ 7.
1 Place your document with text face up in
the ADF or face down on the document
glass.
2 Press the <SCAN> key.
3 Press the to select [Remote PC] and
then press .
4 Click [Start] on your computer, and
select [All Programs]> [Windows FAX
and Scan].
5 Click [New Scan].
6 Select [eS332/403S] and click [OK].
7 Make additional setting if necessary.
8 Click [Scan].
9 Exit [Windows FAX and Scan].
Using ICA Driver
The ICA driver is not compatible with the
Windows OS.
The ICA driver supports the Mac OS X 10.6/10.7.
Start to read
Note
z Some examples of image capture are used in the following
procedure. The steps and menus may differ depending on
the application you use.
1 Press the <Scan> key on the control
panel.
2 Place your document with text face up
inthe ADF or face down on the document
glass.
3
Press the to select [
Remote PC
] and
then press .
4 Start image capture on your computer.
5 Select the machine from the list at the
left to the image capture screen.
6 Click the <Scan>.
Scanning will start.
7 From the [Image Capture], select
[Close Image Capture].
Change settings
You can adjust the document scan by changing
the current driver settings.
The following explains each item to set.
OK
OK
OK
To Next Page
Loading...
