Toshiba e-Studio 332s - Using Actkey Software

Using Drivers and Software
-43-
Scanning
3
Display the detailed information
You can adjust the document scanning in details.
1 Follow steps 1 to 5 of "Start to read"
section.
2 Click on [Display the detailed
information].
3 Change the settings as required.
4 Click [Scan] to scan the document.
Using ActKey Software
Using the ActKey, you can start a scan job in
specified settings with a click a button.
Memo
z ActKey does not support Mac OS X.
z When ActKey is installed, Network Configuration is also
installed simultaneously. For Network Configuration, refer
to "Using Network Configuration" P. 44.
Reference
z For details on how to start a scan job, refer to the User's
Manual Advanced.
Installing the Software
1 Insert the "Software DVD-ROM" into your
computer.
A window opens.
2 Select [ActKey] from [Software].
3 Install the software as instructed.
4 Click [Finish].
Starting the Software
1 Click [Start] to select [All Programs] >
[Toshiba] > [ActKey] > [ActKey].
Starting ActKey when Scanning to a
Local PC
You can set ActKey to start when you select
[Local PC] on the machine.
1 Click [Start] to select [Control Panel].
2 Enter [View scanners and cameras] in
[Search Control Panel].
3 Click the [View scanners and cameras]
under [Devices and Printers].
4 Select [eS332/403S] and click
[Properties].
If the [User Account Control] dialog box
appears, click [Yes].
5 Click the [Events] tab.
6 Select an event for [Select an event].
7 Select the [Start this program] check
box and then select [ActKey].
8 Repeat steps 6 and 7 so that [ActKey] is
set to all events.
9 Click [OK].
Fax Transmission of Scanned
Documents
Using the fax service of the Windows component,
you can send a scanned document.
Note
z The direction to load the paper cannot be changed after
scanning the documents.
z This function uses the fax service of the Windows
component.
Memo
z For PC-FAX function, the resolution is fixed to 200dpi and
the color mode is fixed to black and white.
1 Start ActKey on your computer.
2 Press the <SCAN> key on the operator
panel of the machine.
3 Press the to select [Remote PC] and
then press .
4 Place your document with text face up in
the ADF or face down on the document
glass.
5 Click [PC-Fax] scan button of ActKey on
your computer.
The [Fax Setup] starts.
6 Follow the on-screen instructions to send
a fax.
OK