Deleting or Updating the Drivers
-170-
For Mac OS X 10.4.0-10.4.11
1 Select [Utilities] from the [Move]
menu.
2 Click on the [Printer Setup Utility] tab.
3 Select the device you want to remove
and click [Delete].
4 Close the [Printer List] dialog box.
5 Uninstall the driver by using the installer.
Reference
z For "For Mac OS X 10.5-10.7" P. 169, follow the
procedure in 5-9.
Updating a Printer or Fax
Driver
You can update printer and fax drivers.
For Windows
Note
z You must be logged on as an administrator to complete
this procedure.
z Restart the computer before you start removing a driver.
1 Click on [Start] and then select
[Devices and Printers].
2 Right-click the TOSHIBA e-STUDIO403S
icon and select [Printing preferences].
If you have installed multiple printer drivers,
select [Printer Properties]>[TOSHIBA
e-STUDIO403S(*)].
*Select the type of driver you want to remove.
3 Click [About] in the [Setup] tab.
For a PS driver, select the [Print Options] tab,
and click on [About].
4 Check the version information and then
click [OK].
5 Delete the driver you want to update.
Note
z Delete all the drivers of the same type (PCL, PS, PCL
XPS, and FAX drivers) to ensure updating.
Reference
z "Deleting a Printer or Fax Driver" P. 169
6 Install a new driver.
Reference
z For details on how to install a driver, refer to the User’s
Manual Basic.
For Mac OS X
1 Delete a driver.
Reference
z "Deleting a Printer or Fax Driver" P. 169
2 Install a new driver.
Reference
z For details on how to install a driver, refer to the User’s
Manual Basic.
Deleting a Scanner Driver
You can delete scanner drivers.
Note
z You must be logged on as an administrator to complete
this procedure.
For Windows
1 Click on [Start], and then select
[Control Panel]>[Uninstall a
program].
2
Select [
TOSHIBA e-STUDIOxxxS
Scanner
] and click on [
Uninstall
].
If the [User Account Control] dialog box
appears, click [Yes].
3 If a confirmation message appears, click
[Yes].
4 Click [Finish] on the [Uninstallation
Complete] screen.
For Mac OS X
1
From the hard disk, select
[Library]>[Image Capture]>[TWAIN
Data Sources].
2 Depending on the method of connection
of the machine, the following files will be
deleted.
-Network connection:
TOSHIBA e-STUDIOxxxS Network Driver.ds
- USB connection:
TOSHIBA e-STUDIOxxxS USB Driver.ds
3 Close the [TWAIN Data Sources]
dialog box.
4 From the hard disk, select [Library]>
[Image Capture]>[Devices].
5 Delete the [TOSHIBA Scanner].
To Next Page
Loading...
