Toshiba e-Studio 332s - Saving the Driver Settings; Changing the Drivers Default Settings

Useful Operations for Printing From a Computer
-66-
- Press the <CLEAR> key if you enter a wrong
number.
- Press the <STOP> key if you want to stop the job
search.
13 Make sure [Print] is selected and then
press .
If you select [Delete], you can delete the print
job.
14 Enter the number of copies and then
press .
Reference
z You can delete stored print data with the Configuration
Tool.
z The print job stored on the SD memory card remains after
printing.
Saving the Driver Settings
You can save the printer driver settings.
Note
z This function is not available with the Windows PS printer
driver, the Mac OS X printer driver and the Fax driver.
For Windows PCL/PCL XPS Printer
Driver
 Saving the Settings
1 Click [Start] and select [Devices and
Printers].
2 Right-click the TOSHIBA e-STUDIO403S
icon and then select [Printing
preferences]>[TOSHIBA
e-STUDIO403S(*)].
*Select the type of driver you want to use.
3 Configure the print settings to save.
4 On the [Setup] tab, click [Save] at
[Driver Settings].
5 Specify a name for the setting to save
and then click [OK].
If you select the [Include media settings] check
box, the paper configuration on the [Setup] tab is
also saved.
6 Click [OK] to close the print setup dialog
box.
Memo
z Up to 14 forms can be stored.
 Using the Saved Settings
1 Open the file you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences].
4 On the [Setup] tab, select a setting you
want to use from [Driver Settings].
5 Start printing.
Changing the Driver's Default
Settings
You can use print settings often used as the
printer driver's default settings.
For Windows Printer Driver
1 Click [Start] and select [Devices and
Printers].
2 Right-click the TOSHIBA e-STUDIO403S
icon and then select [Printing
preferences]>[TOSHIBA
e-STUDIO403S(*)].
*Select the type of driver you want to use.
3 Configure the print settings to use as the
driver's default setting.
4 Click [OK].
For Mac OS X PCL/PS Printer Driver
1 Open a file.
2 From the [File] menu, select [Print].
3 Configure the print settings to use as the
driver's default settings.
4 Select [Save Current Settings as
Preset...] from [Presets]. (For Mac OS
X 10.7)
Select [Save As] from [Presets]. (For
Mac OS X 10.4 to 10.6)
5 Enter a name for the settings and click
[OK].
6 Click [Cancel].
Note
z To use the saved settings, select the name from [Presets]
in the print dialog.
OK
OK