Various Functions for Transmission
-24-
2 Check that [Fax] is selected and press
to open the fax standby screen.
3 Press the to select [Fax Functions]
and then press .
4 Press the to select [Fcode Polling]
and then press .
5 Press the to select [ON] and then
press .
6 Enter the sub address of the bulletin box
registered in the sender machine.
7 Select [Enter] and then press .
8 Press the until the start screen appears.
9 Press the to select [Add Destination]
and then press .
10 Specify a destination.
11 Press .
Memo
z Received data is automatically printed.
Storing Documents in a Bulletin Box
You can store only one document in a bulletin
box of your machine.
Reference
z You must register a bulletin box in advance. For details on
how to register a bulletin box, refer to "Registering Fcode
Boxes" P. 22.
1 Place your document with text face up in
the ADF or face down on the document
glass.
2 Press the <SETTING> key.
3 Press the to select [Store Document
Settings] and then press .
4 Check that [Store] is selected and then
press .
5 Check that [Fcode Bulletin board] is
selected and then press .
6 Press the to select a box number and
then press .
7 Check that [Over Write] is selected and
then press .
[Over Write] replaces documents in the box.
8 Press the or to select [Yes] and
then press .
Memo
z The data stored in an Fcode bulletin box is not deleted
when the recipient gets it.
Printing Stored Documents
You can print confidential received documents.
When a document is received at an Fcode box,
an Fcode reception notice is printed. Check the
Fcode box number and print the stored
document.
1 Press the <SETTING> key.
2 Press the to select [Store Document
Settings] and then press .
3 Press the to select [Print] and then
press .
4 Check that [Fcode Box] is selected and
then press .
5 Press the to select the desired box
number and then press .
6 If necessary, enter the PIN number and
then press .
7 Press the to select the file number you
want to print and then press .
8 Press the or to select [Yes] on the
confirmation screen and then press .
Memo
z Confidential received documents are automatically deleted
after printing.
Deleting Stored Bulletin Documents
You can delete documents stored in a bulletin
box.
Memo
z The data stored in an Fcode confidential box is
automatically deleted when you print the data.
z The data stored in an Fcode bulletin box is not deleted
when the recipient gets it.
1 Press the <SETTING> key.
OK
OK
OK
OK
OK
OK
MONO
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
To Next Page
Loading...
