Useful Operations for Printing From a Computer
-60-
For Mac OS X PS Printer Driver
1 Open the file you want to print.
2 From the [File] menu, select [Print].
3 Select [Printer Features] from the
panel menu.
4 Select [Job Option] from [Feature
Sets].
5 Select the [Adjust ultra fine lines]
check box.
6 Configure other settings if necessary and
then start printing.
Memo
z Open the Detailed Setup Menu by pressing the [Show
Details] button in Max OS X 10.7 or by clicking the
triangle symbol at the side of [Printer] menu in Max OS X
10.5 to 10.6.
Auto Tray Selection
You can switch paper feed trays with the same
size of paper configured on the printer driver
automatically.
First, set MP tray to be a target tray for auto
selection on the operator panel. Then, set the
auto selection of the tray with the printer driver.
Note
z Make sure to set a paper size for Tray1, Tray2 (optional)
and MP tray. Available paper size differs depending on
each tray. For details, refer to the User's Manual Basic.
Memo
z In the default settings, the [MP tray Usage] is [Do Not
Use]. In such a case, MP tray is not supported by the auto
tray switching function.
z To enter the [Admin Setup] menu, an administrator
password is necessary. The default password is "aaaaaa".
1 Press the <SETTING> key on the
operator panel.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
4 Select [Enter] and then press .
5 Press the to select [Print Setup] and
then press .
6 Check that [Print Menu] is selected and
then press .
7 Check that [Tray Configuration] is
selected and then press .
8 Press the to select [MP Tray Usage]
and then press .
9 Press the to select [When
Mismatching] and then press .
10 Press the until the top screen appears.
11 Specify a paper tray on the printer driver
and start printing.
For Windows PCL/PCL XPS Printer
Driver
1 Open the file you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences].
4 On the [Setup] tab, select [Auto] from
[Source].
5 Configure other settings if necessary and
then start printing.
For Windows PS Printer Driver
1 Open the file you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences].
4 Select the [Paper/Quality] tab.
5 Select [Automatically Select] from
[Paper Source].
6 Configure other settings if necessary and
then start printing.
For Mac OS X PCL Printer Driver
1 Open the file you want to print.
2 From the [File] menu, select [Print].
3 Select [Setup] from the panel menu.
4 Select [Auto] from [Paper Source].
Memo
z Open the Detailed Setup Menu by pressing the [Show
Details] button in Max OS X 10.7 or by clicking the
triangle symbol at the side of [Printer] menu in Max OS X
10.5 to 10.6.
OK
OK
OK
OK
OK
OK
OK
To Next Page
Loading...
