Using Drivers and Software
-45-
Scanning
3
If the machine is tuned off and cannot be
connected, an error occurs when registering.
After registering, if the computer's name, IP
address or port number is changed, you need to
register again with the above procedure.
Method to delete network-con-
nected PCs of the machine
If you registered several network-connected PCs
in the machine, you can delete them.
Select [Properties] from the [Scanner] menu
and select [Unregister] tab. The registered
information is displayed. Select the registered
information to be deleted from the machine, and
click [Unregister] button.
To Next Page
Loading...
