105
4
Setting the HTTP Network Service
This function allows you to enable or disable the HTTP network server service that provides the web-based
utility on this equipment, such as TopAccess and e-Filing web utility. The HTTP network server service also
must be enabled for IPP printing.
1
Press the [NETWORK] button in the
ADMIN menu.
- The NETWORK menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
Page 78
2
Press the [HTTP] button.
- The HTTP screen is displayed.
3
Specify following items as required.
- SERVER PROTOCOL — Press the [ENABLE] button to enable
the HTTP network server service, or [DISABLE] button to disable
the HTTP network server service. This must be enabled for
TopAccess, e-Filing web utility, and IPP printing.
- [PRIMARY PORT NUMBER] — Press this to enter the primary
port number to be used for the HTTP access from the other client.
It is recommended to use the default port number “80” if you are
not sure changing this port number.
- [SECONDARY PORT NUMBER] — Press this to enter the
secondary port number to be used to access the TopAccess and
e-Filing web utility. It is recommended to use the default port
number “8080” if you are not sure changing this port number.
4
Press the [ENTER] button.
- Returns you to the NETWORK menu.
To Next Page
Loading...
