85
4
Setting the Date and Time
The clock built in to this equipment can be set by entering the date, day of the week and time using the
digital keys. Also, you can easily change the clock to and from the daylight saving system at the touch of
a button.
1
Press the [GENERAL] button in the
ADMIN menu.
- The GENERAL menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
Page 78
2
Press the [CLOCK] button.
- The CLOCK menu is displayed.
3
Press the [DATE/TIME] button.
- If you want to change the date format only, skip to step 10.
- When you press the [DATE/TIME] button, the DATE/TIME screen
is displayed.
4
Highlight the section that you want to edit
using the arrow buttons, and enter the
number using the digital keys.
- The “DAY” section describes the day of week with a number. The
numbers corresponding to the days of week as following:
1: Sun, 2: Mon, 3:Tue, 4: Wed, 5: Thu, 6:Fri, 7: Sat
To Next Page
Loading...
