94
4.SETTING ITEMS (ADMIN)
3.SETTING NETWORK FUNCTIONS (Cont.)
4
5
Continue to another network setting if
required, then press the [APPLY NOW]
button.
- This equipment starts initializing the network interface card to
apply the changes.
Setting the TCP/IP for Static IP Address
1
Press the [NETWORK] button in the
ADMIN menu.
- The NETWORK menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
Page 78
2
Press the [TCP/IP] button.
- The TCP/IP screen is displayed.
3
Press the [STATIC] button in the
“ADDRESS MODE” option.
To Next Page
Loading...
