117
4
Setting the RX Printing
Setting Discard and Reduction Printing
Set print settings for received fax and Internet Fax originals that are to be printed.
Two print settings are available: discard printing and reduction printing.
Discard Printing: ON, OFF
- ON (default setting):
When originals are up to 10mm larger than the printing area; the part of the originals that exceeds the
paper printing area is discarded.
- OFF: The received original is printed on two sheets of paper if its length exceeds the paper printing area.
* For detail of DISCARD setting, contact your service technician.
RX Reduction Printing: ON, OFF
- ON (default setting):
If the received original is longer than the recording paper, it will be vertically reduced to 90% to fit on the
recording paper.
- OFF: The received original is printed on two sheets of paper if its length exceeds the paper printing area.
* Only drawers can be set for received FAX printing. Please see the Operator's Manual for Basic
Functions. Be sure to use LD, LG, LT, LT-R, A3, A4, A4-R or B4.
1
Press the [FAX] button in the ADMIN
menu.
- The FAX menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
Page 78
2
Press the [RX PRINT] button.
- The RX PRINT screen is displayed.
To Next Page
Loading...
