Toshiba e-Studio 350 - Setting General Functions; Setting the Auto Clear Mode

58
3.SETTING ITEMS (USER)
3
1. SETTING GENERAL FUNCTIONS
Setting the Auto Clear Mode
This function sets how long the machine waits before clearing the previous functions set on the control
panel.
1
Press the [USER FUNCTIONS] button on
the control panel to enter the User
Functions menu.
2
Press the [USER] button, and then press
the [GENERAL] button on the touch panel.
- The GENERAL menu is displayed.
3
Press the [AUTO CLEAR] button.
- The AUTO CLEAR screen is displayed.
4
Press the button that indicates the
desired time in seconds.
- The Auto Clear mode has been set to selected time.
If you want to disable the Auto Clear mode, press the [NO LIMIT]
button.