Toshiba e-Studio 350 - Turn off the Power (Shut Down)

76
3.SETTING ITEMS (USER)
3
7. TURN OFF THE POWER (SHUT DOWN)
When turning off the power of the equipment, perform the following shutdown procedure.
DO NOT turn off the power by switching off the power switch of the equipment as it can cause the failure of
the hard disk.
Before turning off the power, be sure that the following 3 conditions are satisfied.
- No jobs are left in the printing job list.
- The ERROR lamp is not blinking.
- No PCs access the equipment via network.
1
Press the [USER FUNCTIONS] button on
the control panel to enter the User
Functions menu.
2
Press the [USER] button, and then press
the [SHUTDOWN] button on the touch
panel.
3
“Processing job will be deleted. Are you
sure you want to shutdown?” appears on
the screen. Press the [YES] button.
- To cancel the shutdown operation, press the [NO] button.
4
“Shutdown in progress” appears on the
screen, and then the equipment is shut
down.
- The power switch automatically returns to the OFF position.