55
2
Setting Output Limitations for All Departments
This function allows you to set the output limitation for all departments by a single operation.
When you select [ON], the output will be disabled for all departments.
When you select [OFF], the infinite outputs will be allowed for all departments.
When you select [ON], the limitation setting for each department code will be set to [ON] and the “Limitation”
field will be set to “0”. If you want to change the limitation setting for each department code, change the
limitation setting by editing a department code.
"Editing the Department Code" Page 50
1
In the DEPT. MANAGEMENT menu, press
the [ALL LIMIT] button.
- The ALL LIMIT screen is displayed.
For the procedure to display the screen on the right, see "Logging
On As Administrator". Page 43
2
Press the [ON] button to disable the
copies/prints for all departments, or [OFF]
button to permit infinite copies/prints for
all departments.
3
Press the [ENTER] button.
- The output limitation settings are saved.
To Next Page
Loading...
