115
4
2
Press the [LINE-2 MODE] button.
- The LINE-2 MODE screen is displayed.
3
Continue the procedure depending on
how you set the Line-2 mode.
- "Transmission and Reception (TX /RX)" Page 115
- "Reception Only (24HR)" Page 115
- "Reception Only (TIMER)" Page 116
Transmission and Reception (TX /RX)
4
Press the [TX/RX] button.
5
Press the [ENTER] button.
Reception Only (24HR)
4
Press the [RX ONLY (24HR)] button.
- Making the 2nd line standby for the reception all the time.
5
Press the [ENTER] button.
To Next Page
Loading...
