SETUP FLOW FOR PRINTING FEATURES 41
Setup Flow for Raw TCP/LPR Printing
This equipment can be used with Raw TCP or LPR printer connection for Windows NT 4.0, Win-
dows 2000, Windows XP, Windows Server 2003 and Windows Vista. Raw TCP or LPR printing
is the common method to setting up the printer from servers.
Setup Flow Description/Reference
Connect this equipment Connect the machine to your network with a network cable.
Reference: QUICK START GUIDE
y Chapter 4 “CONNECTING TO THE DEVICE”
“CONNECTING TO THE NETWORK”
Set up the TCP/IP (IPv4) Assign the IP address, Subnet mask, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“SETTING NETWORK FUNCTIONS”
“Setting the TCP/IP Protocol (IPv4)”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the TCP/IP”
Set up the IPv6 Assign the IP address, Prefix, Gateway address.
Reference: USER FUNCTIONS GUIDE
y Chapter 4 “SETTING ITEMS (ADMIN)”
“SETTING NETWORK FUNCTIONS”
“Setting the IPv6 Protocol”
Reference: TopAccess Guide
y Chapter 7 “TOPACCESS ADMINISTRATOR MODE”
“Setting up from TopAccess”
“Setting up Network Settings”
“Setting up the IPv6”
Windows NT 4.0
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Connecting over TCP/IP Network
Setting up the Raw TCP
or LPR printer connection
Ð
Ð
Ð
Ð
Ð
Ð
To Next Page
Loading...
Need help?
General
