5.[Administration] Tab Page
34 [Setup] Item List
An operator’s password must be set.
Setting up Energy Save
You can set Energy Save mode for your equipment.
For information on types of Energy Save mode and how to enter the mode, see the User’s Guide.
Item name Description
1 Name Enter the device name of this equipment. You can enter up to 15
alphanumerical characters, hyphen (-), and colon (:).
2 Copier Model Displays the model name of this equipment.
3 Location Enter the installed location of this equipment. You can enter up to 64
characters. This is displayed in the [Device] tab page that appears first when
accessing the TopAccess website for users.
4 Contact Information Enter the name of the person who is responsible for this equipment. You can
enter up to 64 characters. This is displayed in the [Device] tab page that
appears first when accessing the TopAccess website for users.
5 Service Phone Number Enter the telephone number of the person who is responsible for servicing this
equipment. You can enter up to 32 digits using numbers and symbols (* - #).
This is displayed in the [Device] tab page that appears first when accessing the
TopAccess website for users.
6 Administrative Message Enter the message to the users about this equipment. You can enter up to 40
characters. This is displayed in the [Device] tab page that appears first when
accessing the TopAccess website for users.
7 Administrator’s Password If you want to change the administrator’s password used to log in functions
from the TopAccess, enter a new password between 6 to 10 alphanumerical
characters.
8 Confirm Password Enter a new password that you entered in the [Administrator’s Password]
field.
9 Operator’s Password If you want to set or change the operator’s password used to log into
functions, enter a new password of between 6 to 10 alphanumeric characters.
10 Confirm Password Enter a new password that you entered in the [Operator’s Password] field.
Item name Description
1 Auto Clear Select how long your equipment can remain inactive before the LCD screen
automatically returns to the default display.
2 Auto Power Save Select how long your equipment can remain inactive before entering
Automatic Energy Save mode.
3 Sleep Mode Select how long your equipment can remain inactive before being
automatically turned off.
The equipment may not enter this mode at the set timing depending on its operational status.
To Next Page
Loading...
