5.[Administration] Tab Page
[Setup] Item List 51
[Administration] Tab Page
Copier Setting
In Default setting, you can set the default copier settings that apply for copy operation from the LCD screen.
*1 This item is only available for e-STUDIO2329A/2829A when the Paper Feed Unit is installed in the equipment.
*2 This items is not available for e-STUDIO2323AM/2823AM/2329A/2829A.
Item name Description
1 Original Mode Select the default original mode.
Text/Photo — Originals with text and photographs mixed.
Text — Originals with text (or text and line art) only.
Photo — Originals with photographs.
Background Erase — Dark background is placed.
2 Exposure Select the default exposure for copying. Select Auto to automatically apply
the exposure by detecting the density of originals, or select the exposure
between -4 to +4.
3 Exposure Level Select the center value used as reference for adjusting the Exposure setting.
4 Sort Mode Priority Select the default sort mode for copying.
Non-Sort — Copies exit without sorting.
Sort — Copies exit in the same page order as the originals one set after
another.
Rotate Sort
*1
— Copies exit in the same page order as the originals one set
after another and every other copy set is rotated by 90 degrees.
5
Image Rotation
*2
Select the image rotation setting. [Enable] is set as the default.
6 2in1/4in1 Original Size Select the initial value of 2in1/4in1 original size.
7 2in1/4in1 Original
Orientation
Select the default value of 2in1/4in1 original orientation.
8 2in1 page layout Select the default value of 2in1 page layout.
9 4in1 page layout Select the default value of 4in1 page layout.
To Next Page
Loading...
Need help?
General