5.[Administration] Tab Page
[Setup] Item List 55
[Administration] Tab Page
*1 This items is not available for e-STUDIO2323AM/2823AM.
Email Setting
You can specify the file format, fragment message size, and default body strings that apply to the Scan to Email
documents.
This item is not available for e-STUDIO2323AM/2823AM.
Some settings may not be reflected on the LCD screen immediately after saving them. The settings will be updated
by pressing the [FUNCTION CLEAR] button on the control panel or after an Auto Clear time period.
Item name Description
1 From Address Enter the Email address of this equipment. You can enter up to 192
alphanumeric characters, symbols, and spaces.
The [From Address] must be entered to enable Email transmission.
2 From Name Enter the name of this equipment. You can enter up to 64 characters.
3 File Format Select the file format of files to be sent.
PDF (Multi) — Select this to save scanned images as a Multi-page PDF file.
PDF (Single) — Select this to save scanned images separately as Single-
page PDF files.
TIFF (Multi) — Select this to save scanned images as a Multi-page TIFF file.
TIFF (Single) — Select this to save scanned images separately as Single-
page TIFF files.
4 Fragment Message Size Select the size of the message fragmentation.
5 Default Body Strings Enter the body text that will be automatically entered in the [Body] box when
users operate Scan to Email from the LCD screen. This sets only the default
body text, so that it can be changed on each operation by users. You can enter
up to 1,000 characters.
1
2
3
4
5
To Next Page
Loading...
