EasyManuals Logo

Toshiba e-STUDIO6550C Series Troubleshooting Guide

Toshiba e-STUDIO6550C Series
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
1 TROUBLESHOOTING FOR THE HARDWARE
22 Clearing a Paper Jam
4
Lower the transfer unit carefully and then close the automatic duplexing unit.
Paper jam on the paper transport path
Be careful not to let your fingers be caught between the equipment and the duplexing unit or automatic duplexing
unit.
This could injure you.
1
Open the automatic duplexing unit on the right.
2
Remove paper jammed on the paper transport path
above the fuser unit. (Only for e-STUDIO356/456)
3
While holding the green lever to lift up the transfer
unit, remove the jammed paper.
2
1
1
Open the automatic duplexing unit on the right.

Table of Contents

Other manuals for Toshiba e-STUDIO6550C Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba e-STUDIO6550C Series and is the answer not in the manual?

Toshiba e-STUDIO6550C Series Specifications

General IconGeneral
BrandToshiba
Modele-STUDIO6550C Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals