EasyManuals Logo

Toshiba e-STUDIO6550C Series Troubleshooting Guide

Toshiba e-STUDIO6550C Series
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 31
1 TROUBLESHOOTING FOR THE HARDWARE
9
Close the Bridge Kit cover.
Paper jam in the Saddle Stitch Finisher MJ-1106 and the Hole Punch Unit MJ-6103 (both optional)
10
Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray of the finisher can also be closed by
pressing the right side of the lever.
1
Raise the lever and open the upper receiving tray of
the finisher.
2
Open the cover of the Hole Punch Unit when it is
installed.
2
1

Table of Contents

Other manuals for Toshiba e-STUDIO6550C Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba e-STUDIO6550C Series and is the answer not in the manual?

Toshiba e-STUDIO6550C Series Specifications

General IconGeneral
BrandToshiba
Modele-STUDIO6550C Series
CategoryAll in One Printer
LanguageEnglish

Related product manuals