1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam 29
1 TROUBLESHOOTING FOR THE HARDWARE
8
Close the Bridge Kit cover.
Jam in the lower receiving tray.
9
Close the upper receiving tray of the finisher.
Place your hands on the near and far side of the lever and push to
close the tray until it clicks.
Be careful not to let your fingers be caught between the
finisher body and the upper tray of the finisher.
This could injure you.
The upper receiving tray can also be closed by pressing the right
side of the lever.
1
Raise the lever and open the upper receiving tray of
the finisher.
2
Remove the jammed paper.
3
Lower the shutter of the paper exit portion and
remove the paper.
2
1
2
1
To Next Page
Loading...
Need help?
General
