1.TROUBLESHOOTING FOR THE HARDWARE
Cleaning the Hole Punch Dust Bin 75
1 TROUBLESHOOTING FOR THE HARDWARE
5
Dispose of the paper punchings.
9
Close the front cover of the finisher.
3
Open the Hole Punch Unit while pushing the green
lever.
4
After moving the hole punch dust bin to the left, pull it
toward you.
6
Push back in the hole punch dust bin.
7
Return the Hole Punch Unit to its original position.
8
Carefully return the finisher to its original position.
Do not put your hand or fingers on the top of the finisher when
closing it.
They could be caught and this could injure you.
2
1
To Next Page
Loading...
Need help?
General
