Unified Controller nv series PROFIBUS(PA912) Module Instruction Manual
v
CAUTION
Prohibited
Do not touch anything other
than the operation part
(setting switches inside the
module), such as the IC parts
and terminals, connectors,
and soldered surfaces inside
the module.
Doing so may result in electrostatic
breakdown of the ICs and LSIs,
causing failure. Also, an injury
may occur due to the ends of the
part lead wires, or burns may occur
due to hot parts.
Prohibited
Do not disassemble or modify
the device or module.
It may cause malfunction or failure
as well as loss of safety of the
device.
Prohibited
Do not forcefully bend, pull, or
twist the power cord and
cables.
It may cause breaks or heating.
Prohibited
Do not insert any metal into
the gaps of the device main
body.
It may cause fire.
5. Safety Precautions on Transportation, Storage, and Disposal
CAUTION
Mandatory
Observe ordinances and
rules.
When destroying the product,
observe the ordinances and rules of
the local government.
Prohibited
For transportation and storage
of the product, use a
conductive bag and packaging
box.
Otherwise it will cause failure.
To Next Page
Loading...
