Toshiba PA912 - Configuration Import Method

Chapter 3 Setting
6F8C1259
48
3.3.1 Configuration import method
3.3.1.1 Importing the slave device configuration
In the following steps, import the slave device configuration created with the
Anybus NetTool-PB.
1 Register the PA912 to the I/O node.
Select [I/O node], and select the [File] menu - [New].
Specify an arbitrary I/O node number and set "I/O node device name =
PA912." Then, click the [OK] button.
Figure 3-20 New I/O node creation screen