EasyManua.ls Logo

Toshiba PROSEC T1-16S - Page 113

Toshiba PROSEC T1-16S
301 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6F3B0253
Basic Hardware and Function 111
7. Instructions
Compare instructions (continued)
FUN
No.
Name Expression Function Steps
Speed
(µs)
Page
108 Unsigned
greater than
[ A U> B ]
Turns ON output if A > B.
(Unsigned integer compare)
3 190
109 Unsigned
greater than or
equal
[ A U>= B ]
Turns ON output if A B.
(Unsigned integer compare)
3 191
110 Unsigned
equal
[ A U= B ]
Turns ON output if A = B.
(Unsigned integer compare)
3 192
111 Unsigned
not equal
[ A U<> B ]
Turns ON output if A B.
(Unsigned integer compare)
3 193
112 Unsigned
less than
[ A U< B ]
Turns ON output if A < B.
(Unsigned integer compare)
3 194
113 Unsigned
less than or
equal
[ A U<= B ]
Turns ON output if A B.
(Unsigned integer compare)
3 195
Special data processing
FUN
No.
Name Expression Function Steps
Speed
(µs)
Page
If A is a device:
Sets device A to ON.
114 Device/register
set
[ SET A ]
If A is a register:
Stores HFFFF in register A.
2 4.2 196
If A is a device:
Resets device A to OFF.
115 Device/register
reset
[ RST A ]
If A is a register:
Stores 0 in register A.
2 4.2 197
118 Set carry
[ SETC ]
Sets the carry flag to ON. 1 4.2 198
119 Reset carry
[ RSTC ]
Resets the carry flag to OFF. 1 4.2 199
120 Encode
[ A ENC (n) B ]
Finds the uppermost ON bit
position in the bit file of size 2
n
bits starting with register A, and
stores it in B.
4
57.0 -
141.4
200
121 Decode
[ A DEC (n) B ]
In the bit file of size 2
n
bits
starting with register B, sets ON
the bit position indicated by
lower n bits of A, and resets
OFF all other bits.
4
69.5 -
99.1
201
122 Bit count
[ A BC B ]
Counts the number of ON bits
of A and stores it in B.
3 202
147 Flip-flop
S F/F Q
R A
Sets ON device A when set
input (S) is ON, and resets OFF
device A when reset input (R) is
ON.
(Reset takes priority)
2 26.7 215
149 Up-down
counter
U U/D Q
C
E A
While enable input (E) is ON,
counts up or down the number
of cycles the count input (C)
comes ON, depending on the
up/down select input (U).
Up when U is ON, down when U
is OFF.
2 30.1 216

Table of Contents

Related product manuals