6F3B0253
Basic Hardware and Function
25
1. System Configuration
1.5.2 I/O modules
The T1-16S can connect up to eight I/O modules.
The following 10 types of the I/O modules are available.
For specification details of the I/O modules, refer to the separate manual “T1-16S
User’s Manual − I/O Modules −“.
Type
Description
Power supply
DI116M
16 points input, 24Vdc – 5mA
DO116M
16 points output, 24Vdc – 100mA
DD116M
8 points input, 24Vdc - 5mA
+ 8 points output, 24Vdc – 100mA
RO108M
8 points relay output, 24Vdc/240Vac - 1A
AD121M
1 channel analog input, 0 to 5V / 0 to 20mA
AD131M
1 channel analog input, ±10V
DA121M
1 channel analog output, 0 to 20mA
DA131M
1 channel analog output, ±10V
TC111M
1 channel thermo-couple input
FR112M
TOSLINE-F10 remote station,
1 word input + 1 word output
Supplied from the
basic unit (5 Vdc)
Expantion connector Expantion connectors
FR112M
Other I/O modules
(1) If more than 8 I/O modules are connected, T1-16S cannot operate normally.
(2) The TOSLINE-F10 remote station module (FR112M) must be connected at the
right end. Tow or more FR112Ms cannot be used together.
NOTE
To Next Page
Loading...
