Toshiba PROSEC T1-16S - Page 185

6F3B0253
Basic Hardware and Function 183
7. Instructions
FUN 101
<=
Less than or equal
Expression
Input −[ A <= B ]− Output
Function
When the input is ON, the data of A and the data of B are compared, and if A is less than or equal
to
B
, the output is turned ON.
Execution condition
Input Operation Output
OFF No execution OFF
ON Execution
A ≤ B
ON
A > B
OFF
Operand
Name Device Register Constant Index
X Y R S T. C. XWYWRWSW T C D I J K
A Compared
data
√√√√√√√√√√ √ √
B Reference
data
√√√√√√√√√√ √ √
Example
When R00C is ON, the data of D0125 is compared with the constant data -100, and if the data
of D0125 is less than or equal to -100, R020 is turned ON.
If the data of D0125 is -150, the comparison result is true. Consequently, R020 is turned ON.
D0125 -150 < Constant -100 R020 is ON
If the data of D0125 is 0, the comparison result is false. Consequently, R020 is turned OFF.
D0125 0 ≥ Constant -100 R020 is OFF
Note
• This instruction deals with the data as signed integer (-32768 to 32767).