6F3B0253
Basic Hardware and Function 269
8. Special I/O Functions
Sample program
Main program
(H3045)
I/O interrupt program #3
Interrupt program A
I/O interrupt program #4
Interrupt program B
In this example, 12357 (H3045) is set in SW16. As a result, the interrupt input function
(2 points, rising for both) is selected.
When X002 is changed from OFF to ON, the interrupt program A is executed. When
X003 is changed from OFF to ON, the interrupt program B is executed.
Even if the Direct I/O instruction is used in the interrupt program, the
corresponding input state (X002 or X003) cannot be confirmed. Because
the interrupt is generated before internal updating of the input states.
NOTE
To Next Page
Loading...
