Item
Operation flow and applicable data, etc.
Description
23. Short Timer
In the normal condition, after switching one circuit
breaker, 3-minute delay time for compressor and
1 hour for plasma air purifier are set for the
maintenance of the unit.
Purpose
To start the unit immediately for the purpose of
testing, trial...etc, short timer can be used.
maintenance of the unit.
Short Timer Setting
j Press [ ] button to turn the unit OFF.
k Set the operation mode or plasma air
purifier on the remote control without
sending the signal to the unit.
l Press button and hold, "00" will
show on display, them press [ ]
button to make "00" disappear.
m
Press [ ] button to turn the unit ON.
n When short timer is activated, all
setting on the remote operates
immediately, besides, all indicatiors on
front panel turns ON continuously for
3 seconds.
4
3
3
To Next Page
Loading...
