Toshiba RAS-B10G3KVSG-E - Operation of Remote Control; Parts Name of Remote Controller

9-4. Remote control
9-4-1. Parts Name of Remote Controller
1
Infrared signal emitter
2
Start/Stop button
3
Mode select button
4
Temperature button
5
Fan speed button
6
Menu select button
7
Set louver Up-Down button
8
Set louver Left-Right button
9
Check button*
*Check button under battery cover
: Select Auto A.
: Set the desired temperature. Min. 17°C, Max. 30°C.
: Select AUTO, LOW , LOW+ , MED ,
1. Press
2. Press
3. Press
MED+
, HIGH or Quiet
2. COOLING / FAN ONLY / OPERATION
: Select Cool , or Fan only .1. Press
2.
Press : Set the desired temperature. Min. 17°C, Max. 30°C.
Fan Only: No temperature indication
: Select AUTO, LOW , LOW+ , MED , 3. Press
MED+
, HIGH or Quiet
For dehumidication, a moderate cooling performance is controlled
automatically.
1. Press
: Select Dry .
2. Press : Set the desired temperature. Min. 17°C, Max. 30°C.
Note: DRY mode fan speed is set to Auto only.
4. DRY OPERATION
: Select Heat .1. Press
2. Press
: Set the desired temperature. Min = 5°C, Max = 30°C.
* Temperature range 5-16°C is Heat mode with 8°C operation with less of
energy usage
: Select AUTO, LOW , LOW+ , MED
, 3. Press
MED+
, HIGH or Quiet
Note: During 8 °C mode active (temperature range 5-16°C), some operation
such as QUIET, HI-POWER, TIMER OFF cannot use.
3. HEATING and 8°C OPERATION
9-4-2. Operation of remote control
1. AUTOMATIC OPERATION
To automatically select cooling, heating, or fan only operation
2
1
4
6
8
3
5
7
MODE
FAN MENU
FIXFIX
- 54 -