Toshiba RAS-B10G3KVSG-E - Name and Functions of Indications on Remote Controller

9-4-3. Name and Functions of Indications on Remote Controller
[Display]
All indications, except for the clock time indicator, are displayed by pressing the button.
1 Transmission mark
This transmission mark
indicates when the
remote controller transmits signals to the indoor
unit.
2 Mode indicator
Indicates the current operation mode.
(A : Automatic , : Cool, : Dry,
: Heat, : Fan only)
3 Temperature indicator
Indicates the temperature setting.
4 SWING and HADA CARE FLOW indicator
Indicates status of SWING and HADA CARE
FLOW
5 FAN speed indicator
,
Indicates the selected fan speed.
AUTO or five fan speed levels
( LOW , LOW
+
, MED , MED
+
HIGH
) can be shown.
6 Hi-POWER indicator
Indicates when the Hi-POWER operation starts.
7
POWER-SEL
8 A, B change indicator remote controller
When the remote controller switching function is
set, “B” appears in the remote controller display.
(When the remote controller setting is “A”, there is
no indication at this position.)
9
Quiet
Indicates when quiet is activated.
Press Fan button to start and press it again to select
other fan speed for operation.
1 0 ECO indicator
Indicates the selected POWER-SEL level.
( 100%,
75%,
50%)
Indicates when the ECO is in activated.
1 2 Fireplace operation
Indicates
the selected Fireplace 1 and Fireplace 2.
14
8°C OPERATION
Shows
during enter serv
ice Mode.
1 1 Silent operation
Indicates the selected Silent 1 and Silent 2.
1 3 Timer off operation.
Indicates when the OFF timer operation active.
V
V
H
H
Swing
off
Vertical
(Up-Down)
Swing
Vertical and
Horizontal
Swing
Horizontal
(Left-Right)
Swing
HADA CARE FLOW
Indicates when 8°C operation star.
15 Service Mode indicator
1
4
2
3
5
6
7
9
10
11
12
15
8
14
13
- 69 -