Toshiba RAS-B10G3KVSG-E - Page 56

SILENT OPERATION (Outdoor Unit)
Keep outdoor unit operating silently to ensure either yourself or neighborhood
will have a tight sleep in nighttime. By this feature, the heating capacity will
be optimized to deliver such silent experience. The silent operation can be
selected from one of two purposes (Silent 1 and Silent 2).
There are three setting parameters: Standard level > Silent 1 > Silent 2
Silent 1:
●
Though operating silently, the Heating (or Cooling) capacity is still prioritized
to ensure having sufcient comfort inside the room.
●
This setting is a perfect balance between the Heating (or Cooling) capacity
and the Sound level of outdoor unit.
Silent 2:
●
●
Compromising the Heating (or Cooling) capacity to the Sound level in any
circumstance where the outdoor unit’s sound level is highly prioritized.
This setting has a purpose to reduce the maximum sound level of outdoor
unit by 4 dB(A).
Note:
● While activating of Silent operation, inadequate heating (or cooling)
capacity may occur.
Silent Operation Setting
Hi POWER OPERATION
Hi-P
To automatically control room temperature and airow for faster cooling or
heating operation (except in DRY and FAN ONLY mode)
1. Press MENU button for enter menu setting and press TEMP. button to
select Hi POWER
ECO
ECO OPERATION
To automatically control room temperature to save energy
(except in DRY and FAN ONLY mode)
1. Press MENU button for enter menu setting and press TEMP. button to
select ECO
Note:
●
Cooling operation; the set temperture will increase automatically
1 degree/hour for 2 hours (maximum 2 degrees increase).
For heating operation the set temperature will decrease.
1. PressMENUbuttonforentermenuselection
2.EnterSILENTsetbypressMENUbutton.
trianglemarkwillstopblinkandsettingfeaturewillbeblinkinstead.
3. SelectSILENToperationbypressTEMP.button.
4. ConrmselectedfeaturebypressMENUbuttonagain.
Whenfeaturehadselectedwillreturntomenuselectiondisplaytrianglemark
willblink
5. LeavefrommenusettingdisplaybyselectEXIT.
SILENT#1 SILENT#2 None
Duringtrianglemarkblink
canselectmenubypressTEMP.button.
Blink
Blinkbothtriangleand
featuremarkFeaturenot
yetset
Blinkonlytriangle
Featurealreadyset
2.ConrmselectedfeaturebypressMENUbuttonagain.
3.LeavefrommenusettingdisplaybyselectEXIT.
Blinkbothtriangleand
featuremarkFeaturenot
yetset
BlinkonlytriangleFeature
alreadyset
2.ConrmselectedfeaturebypressMENUbuttonagain.
3.LeavefrommenusettingdisplaybyselectEXIT.
Blinkbothtriangleand
featuremarkFeaturenot
yetset
BlinkonlytriangleFeature
alreadyset
- 56 -