1 Select “Add AC (Adapter)” from both display above. 2 Select AC (adapter) connection method.
Wireless adapter Built-in
Active Wireless adapter by
remote controller and Auto login.
*Note
1.In case of Wi-Fi router change or Email for register change need to re-process for add Wireless adapter again
(Built in type : Press MODE button at Remote controller 5 seconds for active AP mode).
2.In case of change Wireless adapter to use with other A/C need to factory reset and re-process for add Wireless adapter again
(Built in type : Press MODE button at Remote controller 5 seconds and select “rb”).
Built-in type , Wireless adapter already install with unit.
2 Open application and select Log in. 3 Enter user name and
password.
4 Login successful.
1 Connect Wireless adapter to A/C and turn on power supply.
Login to Toshiba Home AC Control application.
Add Wireless adapter for control by Toshiba Home AC Control application.
To Next Page
Loading...
