Fig. 10-2-1
Secure the outdoor unit with fixing bolts and nuts if the unit is likely to be exposed to a strong wind.
Use ∅ 8 mm or ∅ 10 mm anchor bolts and nuts.
·
·
· If it is necessary to drain the defrost water, attach drain nipple 11 and cap waterproof 12 to
the bottom plate of the outdoor unit before installing it.
10-2-1. Optional installation parts
10-2. Installation
<Fixing bolt arrangement of outdoor unit>
Drain outlet
Air inlet
Air outlet
108 mm
28 mm
600 mm
320 mm
125 mm
86 mm
102 mm
90 mm
340 mm
w
When using a multi-system outdoor unit, refer to the installation manual
provided with the model concerned.
Part
code
Parts name Q’ty
A
Refrigerant piping
Liquid side : Ø6.35 mm
Gas side : Ø9.52 mm
(RAS-B07, 10, 13G3KVSG-E)
(RAS-B07, 10, 13G3KVSGB-E)
Ø12.70: mm
(RAS-B16G3KVSG-E)
(RAS-B16G3KVSGB-E)
One
each
B
Pipe insulating material
(polyethylene foam, 6 mm thick)
For RAS-B07, 10, 13G3KVSG-E
RAS-B07, 10, 13G3KVSGB-E
(polyethylene foam, 8 mm thick)
For RAS-B16G3KVSG-E
RAS-B16G3KVSGB-E
1
C
Putty, PVC tapes
One
each
To Next Page
Loading...
