10-6-5. Auto Restart Function Setting
This product is designed so th
at, after a power failure,
it can restart automatically in the same operating
mode as before the power failure.
Information
The product is shipped with Auto Restart function in the
ON position. Turn it OFF if this function is not required.
<How to turn OFF the Auto Restart Function>
• Press and hold the [OPERATION] button on the
indoor unit for 3 seconds (3 beep sounds but
OPERATION lamp does not blink).
<How to turn ON the Auto Restart Function>
• Press and hold the [OPERATION] button on the
indoor unit for 3 seconds (3 beep sounds and
OPERATION lamp blink 5 time/sec for 5 seconds).
NOTE
• In case of ON timer or OFF timer are set,
AUTO RESTART OPERATION does not activate.
To Next Page
Loading...
