Media Application Server Installation
MicroMAS Installation
1-18 STRATA CIX MAS INSTALLATION 06/09
Step 11. Power Up the PC
1. Plug-in the power cable to the rear of the unit and to the UPS.
2. Power up the unit using the Power Switch on the front control panel. If the Windows XP logon
screen does not display, check the connections detailed in Steps 3 and Steps 3.
If the Windows Found New Hardware Wizard starts follow “Install Fax-modem Board
Software - All MAS Systems” on page 1-19 or “Configure Voice Board Software” on
page 1-28 as appropriate. If no PCI cards are installed skip forward to “Configure Software”
on page 1-29.
To Next Page
Loading...
