Media Application Server Installation
MicroMAS Installation
Strata CIX MAS Installation 06/09 1-17
Step 8. Check Hardware Connections
Check to insure that all other boards and cables are properly seated.
Step 9. Complete MicroMAS Hardware Setup
1. Replace the cover and tighten the two thumbscrews.
2. Connect the following items (see Figure 1 - 11 on page 17 for
connections):
• Keyboard
• Monitor
• Mouse
The hardware portion of this installation is now complete.
Step 10. (Optional) Install Footstand
Set the unit on the footstand (shown at right).
Figure 1 - 11 MicroMAS Front and Back Panels
AC Power Cord
Connectore
220V and 110V Switch
Main Power
Switch
USB
RJ45 LAN
Connection
Mouse
Keyboard
Com 2
Com 1
VGA Connector
PCI Card Slots
Line-in (Blue)
Line-out (Green)
Mic-in (Pink)
003-MM
To Next Page
Loading...
