Media Application Server Installation
MAS Modem Installation (Optional)
1-44 STRATA CIX MAS INSTALLATION 06/09
MAS Modem Installation (Optional)
The MAS can be accessed from a remote location via the network by using the Windows® XP
Remote Desktop feature. The MAS can also be accessed via a dial-up connection after the
installation of the Zoom 3090 USB V.92 Modem (Toshiba part number SYS-USB-MODEM).
The Zoom™/Modem V.92 USB Mini is a compact external modem
for Windows computers.
Zoom is a registered trademark of Zoom Telephonics, Inc.
Important! Do not connect the modem to the USB until after the modem driver
software has been installed on the MAS.
Step 1: Install Modem Driver Software on the MAS
Install the USB modem driver software before connecting the modem to the USB port on the MAS.
1. Insert the Zoom driver software CD-ROM into the MAS CD drive. The CD will auto-run.
2. Select Install Modem Drivers.
3. Select USB Drivers.
Physical Size
2.75 in. x 5.0 in. x 0.87 in.
(7.0 cm x 12.7 cm x 2.21 cm)
Power
USB port powered
no batteries or AC adapters are required
Interface Cables
Modem to MAS: USB cable (included)
Modem to phone circuit: RJ-11 (NOT included)
Regulatory Approvals
FCC Parts 15B and 68
UL, C-UL, CE
To Next Page
Loading...
Need help?
General