108
Utilities
Password Utility
Deleting a supervisor password
To delete a supervisor password:
1 In the
Search field, type Password Utility.
2 Click
Password Utility ().
A pop-up screen appears asking for a password.
3 Enter your password, and then click
Verify.
4 Click
Supervisor Password.
5 Click
Delete.
An authority verification pop-up screen appears.
6 Click
Delete.
7 Enter the password, and then click
Verify.
8 Click
OK to exit.
Using a user password
A user password provides power-on password protection.
Setting a user password
If you choose to set a supervisor or user password,
TOSHIBA strongly recommends that you save your
password in a location where you can later access it
should you not remember it.
TOSHIBA is not responsible for any losses that may
occur to you, your organization or others as a result of the
inability to access your computer.