119
Utilities
Fingerprint Authentication Utility
Fingerprint Authentication Utility
(Available on certain models.)
The fingerprint authentication utility can be used to replace
the keyboard-based user password authentication system
when booting up.
The fingerprint authentication utility can also be used for
user logon. The user’s fingerprint is read; if the system
recognizes the fingerprint, the user is automatically logged
on.
Fingerprint utility limitations
TOSHIBA does not guarantee that the fingerprint utility
technology will be completely secure or error-free. TOSHIBA
does not guarantee that the fingerprint utility will accurately
screen out unauthorized users at all times. TOSHIBA is not
liable for any failure or damage that might arise out of the
use of the fingerprint software or utility.
Using the Fingerprint Authentication Utility
To access the Fingerprint Authentication Utility from the Start
screen begin typing
Fingerprint Utility, then click the
Fingerprint Utility. For information on enrolling fingerprints
and using the utility please refer to your online Help file.
It is recommended that you complete the Fingerprint
practice tutorial before starting fingerprint enrollment. The
Fingerprint practice tutorial shows how to achieve the
highest quality fingerprint samples.
If you choose to use this utility it is strongly
recommended that you delete your fingerprint template
data before transferring ownership or disposing of your
computer. Otherwise, personal information and/or
proprietary information on the internal storage drive may
be viewed by a third party. For details on how to delete
the fingerprint data, see your online Help file.
NOTE
To Next Page
Loading...
Need help?
General
